| Hardware/Module | Support Status | Comment |
| Bootloader using PS2LINK | Working | Path can be changed in kernelloader menu using USB keyboard. |
| Bootloader using network | No support | Modules not loaded. |
| Bootloader using USB | Working | Can be selected from kernelloader menu. |
| Bootloader using HDD | No support | Modules not loaded. |
| Bootloader using MC | Working | Can be selected from kernelloader menu. |
| GS | Working | Code doesn't exist and is not needed. Linux has own graphic driver. Code is required for NetBSD. |
| SIFDMA | Working | SB_SIFDMASTAT is incomplete. |
| SIFCMD | Working | Code is complete. |
| SIFRPC | Working | Code is incomplete. |
| IOPHEAP | Working | Code is complete. |
| PAD | Working | SB_PAD_INFOCOMB is missing. IOP debug output must stay disabled in kernelloader menu. |
| SOUND | Error | Code is missing. |
| MC | Working | SBR_MC_CALL is missing. |
| CDVD | Working | Code is incomplete. PS1 CDs and PS2 DVDs are working. Audio CDs and video DVDs are not working. |
| REMOCON | Error | Code is missing. |
| USB | Working | USB keyboard and memory stick tested. |
| HDD | Working | Working in PIO mode. |
| INTRELAY.IRX | Working | ps2link must be disabled to get network interrupts working. |
| DMARELAY.IRX | Not Working | Is automatically activated, but should be deactivated. Code is complete, but I am not sure if it is correct. ps2link must be disabled. SMAP seems not to be used, because linux driver uses newer unknown RPC interface. |
| USB Keyboard | Working | Also supported within kernelloader menu. |
| Network | Working with SCPH-10350 and SCPH-10281 |
Working in PIO mode. ps2link must be disabled. DMA is not working, because linux 2.4.17 driver uses different RPC interface. |
| New ROM Modules | Unstable | System freeze at startup when XMCMAN.IRX, XMCSERV.IRX or XPADMAN.IRX is loaded. |
| Old ROM Modules | Working | See other entries in this table. Only some calls are missing. |